Fuel Filter Cross Reference

Nuevos productos


Features and maintenance of Perkins generator set

Features and maintenance of Perkins generator set

Perkins is one of the first companies in the world to produce engine companies. Founded in 1932, Perkins has an annual production capacity of nearly 400,000 engines. The engines produced with diesel and natural gas fuels have been widely promoted and applied in various industries due to their economical, reliability and durability advantages. In order to enable our users to have a deeper understanding of our products, we now introduce the knowledge of Parkinson diesel generator maintenance. 1, the maintenance of the cooling system The new unit of the Perkins diesel generator set should be filled with coolant before starting. When filling, the deflation valve of the upper cooling system of the engine should be opened, and the coolant should be slowly added to the engine from the water supply port of the radiator tank until there is no air bubble and then discharged from the vent valve. The coolant should be filled below the neck of the radiator tank and should not be overfilled. After filling, the deflation valve is closed and the door on the water filter mount is opened to allow the DCA4 additive to mix into the cooling system. The cooling liquid used in the cooling system should mainly consist of pure water, antifreeze and DCA4 additive. Each liter of coolant contains 50% pure water, 50% antifreeze and 0.5 unit DCA4 additive. The well-equipped coolant can be used all year round and can be used continuously for two years. Pure water can be prevented from forming scale due to purification. Antifreeze refers to industrial ethylene glycol or propylene glycol, which can lower the freezing point of water and increase the boiling point of water. The concentration of antifreeze should be 40%. 68%, too high or too low concentration will affect the antifreeze ability of the coolant. In most climatic conditions, the recommended concentration of antifreeze is 50%, and the freezing point of the coolant can reach -33cC. The DCA4 additive forms a protective film on the inner surface of the water system to prevent cavitation and block deposits in the liner and body. 2, maintenance of the lubrication system SH grade oil; when the ambient temperature is lower than -5°C, use 10W-30CF4, CG4, CF4/SG, or CG4/SH grade oil. B and C series engines must use CF4/SG or CG4/SH grade oil. Our company mainly produces filters, Fuel Pump, Oil Pump, Belt, AVR, Electronic Actuator, Electronic Governor, Stop Solenoid, Generator Starting Controller, Oil Pressure sender, Switch, Sensors, Radiator, Alternator, Starter, Turbocharger, Meters, Truck Parts, Bus Parts, Other generator parts and Engine spare parts

El filtro de aire es el primer paso para proteger el motor. Su función principal es filtrar las impurezas nocivas y partículas de arena que entrarán en el motor, a fin de reducir el desgaste prematuro de cada sistema circulante del motor. Nuestro filtro de aire utilizado para Caterpillar (CA T), Fleetguard, Baldwin, Perkins, VOLVO, Donaldson, IVECO, Johe Deere, Komatsu, JCB, Mitsubishi y así sucesivamente. Nuestros productos de filtros de aire son muy completos, en cualquier momento son bienvenidos a la orden.

Ver :

primero << 1 2 3 4 5 6 7 8 9 10 >> Último
[  Un total de  17  páginas]
en línea


Chatea ahora Por favor haga clic aquí para la consulta
Si tiene preguntas o sugerencias, por favor déjenos un mensaje, ¡le responderemos tan pronto como podamos!